Event Schdeule Event Photos News Make/Model Search
LOG IN Return Policy/Shipping VIEWCART CHECKOUT CONTACT
TiteBike.com - Get on it! Motorcycle Parts for Suzuki, Honda, Yamaha, Ducati and more....
Search by Make and Model
Fun Stuff
38 Special Accessories
Air Filters
Airbrush Graphics Stencils
Apparel
Bargain Corner
Batteries
Bodywork
Cafe Racer Parts
Chains & Sprockets
Chemicals
Cool Looks
CRUISE-MATE
Cruiser/Touring
CryO2
Exhaust Systems
Exhaust Wrap & Accessories
Fender Eliminator Kits
Frame Sliders
Gauge Face Plates
GP Pegs
Hard to Find
Hauling
Heat Protection
Helmets
Helmet Bags and Accessories
HID Xenon Headlight Kits
Instant Storage/Garages
Intake Performance Kits
Levers, Clip-ons, Risers, Grips
License Plate Lights
License Plate Mounting
Lights and Turn Signals
Locks
Luimoto Seat Covers
Magnetic Tank Bags
Marchesini Wheels
Master Cylinders
Mirrors, Extenders & Caps
Nitrous Kits
No-Cut Frame Sliders
Nytrex Nitrous Systems
Power Commander and Tuning Systems
Race Case Covers
Race Leathers, Boots, Gloves, Armor
Rearsets
Safety
Safety
Solo Seat Cowls
Stands
Steering Dampers
Suspension/Lowering Links
Swingarm Extensions
Swingarm Spools
Tank Covers/Protectors
Tires
Tire Warmers
Tools
Track Side
Undertails and Huggers
Headlight Covers
Yoke Protectors

Search By Make/Model
Selling motorcycle parts Since 1975!
Secure online credit card processing
Free Shipping to the Lower 48 United States for RETAIL ONLY!
FREE SHIPPING FOR RETAIL SALES ONLY
On orders placed before midnight this Sunday (9/23/2018)
(Lower 48 US only!)
(DEALERS PAY SHIPPING)
Like UsLike Us
 

Handlebar Risers

We offer 40 different handlebar risers for Honda, Ducati (monsters), Kawasaki, Suzuki, Yamaha, Triumph, and Moto Guzzi. Our handlebar risers are machined from billet aluminum and finished in either brushed aluminum or black anodized. Shaped like the base of your handlebar mount, they will raise the handlebars upward and back (due to the fork angle), still leaving the motorcycle with a very stock look. Our risers are made to be installed on top of the top triple clamp and under the handlebar to raise the bars higher and still clear the fairing and the gas tank when turned full left or right. Our line of Handlebar Risers is designed to raise your handlebars the maximum your motorcycle will allow.

On most models, no change of the control cables is needed. We supply longer brake hoses on those models that do require changes. There is no need to remove or change any of the controls on the handlebars. Most installations can be completed in as little as 10 minutes.

Most riders will have to sit on the bike to notice that there is something different. It's just more comfortable. Raising the bars up even a mere 3/4" (19mm) makes a real difference in the weight on your hands. Raising your bars with a spacer design, like our handlebar riser, you raise the bars but still retain the stock angle. This is very important to maintaining even weight distribution across your hands during braking and turning.

The easiest way to explain what improvement adding 3/4� (19mm) risers will make is to make a fist with your hand and place it on the handlebars. That is close to what the new comfort level will be. If the risers are 1 �� (32mm), then you will be even more comfortable. When it comes to raising the handlebars, very little will make a big difference!



Select your manufacturer:


Honda Handlebar Risers
Suzuki Handlebar Risers
Universal Risers
Yamaha Handlebar Risers
Kawasaki Handlebar Risers
Aprilia Handlebar Risers
BMW Handlebar Risers
Ducati Handlebar Risers
Triumph Handlebar Risers
100 MM ALLUMINUM RISERS HANDLEBAR 25,4 INCH  Item #: MM-M1052  $89.95

These are some of the coolest billet risers ever. They will add an awesome hot rod look to your bike. Each pair is machined from a solid block of billet aluminum and polished to a show room finish.

Sold in pairs.

Universal - Custom Applications for 1" (25 mm) handlebars

100 MM ALLUMINUM RISERS HANDLEBAR 25,4 MM  Item #: MM-M1055  $88.71

These are some of the coolest billet risers ever. They will add an awesome hot rod look to your bike. Each pair is machined from a solid block of billet aluminum and polished to a show room finish.

Sold in pairs.

Universal - Custom Applications for 1" (25 mm) handlebars

120 MM ALUMINUM RISERS  Item #: MM-M1017  $133.98

These are some of the coolest billet risers ever. They will add an awesome hot rod look to your bike. Each pair is machined from a solid block of billet aluminum and polished to a show room finish.

Sold in pairs.

Universal - Custom Applications for 1" (25 mm) handlebars

Adaptor Kit for Handlebar Risers and T-Bar - Kawasaki Vulcan 800/1500/1600 Classic/VN900  Item #: 50-55527  $47.95

Bolt for threaded risers. Sold in pairs. 1/2"-20 thread mounting holes

Adaptor Kit for Handlebar Risers and T-Bar - Honda VT1100/ Sabre/ VT750, ACE  Item #: 50-55526  $47.95

Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

Adaptor Kit for Handlebar Risers and T-Bar - Suzuki VL1500 Intruder  Item #: 50-55522  $47.95

Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

Adaptor Kit for Handlebar Risers and T-Bar - Suzuki VL800 01-04  Item #: 50-55524  $47.95

Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

  • Adaptor Kit for Handlebar Risers and T-Bar - Yamaha V-Star 650/1100 Classic, Custom Road Star 1600/1700  Item #: 50-55521  $47.95

    Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

    Adaptor Kit for Handlebar Risers and T-Bar - Kawaski Vulcan 800/1500/1600 Classic/VN900  Item #: 50-55523  $47.95

    Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

    Adaptor Kit for Handlebar Risers and T-Bar - Suzuki VS1400 87-98/ VS750  Item #: 50-55525  $43.95

    Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

    Aeromach AM-3620C/3680C 6 inch Pullback Handlebar Risers for Honda Cruisers  Item #: AM-3620C  $156.95

    These 6 inch Pullback Handlebar Risers are designed to fit the Honda VTX 1300 Custom, replacing the stock "TBars".  

     

    Chrome Handlebar Clamp - 3-1/2`` space  Item #: 53-5283  $74.95

    Fits all triple trees with 3-1/2" center. Fits 2 piece risers and 1" handlebar.

    Chrome Handlebar Clamp - 4`` space  Item #: 50-110182  $74.95

    Fits all triple trees with 4" center. Fits 2 piece risers and 1" handlebar.

    Euro Style Chrome Risers - 3``  Item #: 50-1303  $116.95

    CNC Machined. Riser kit fits most cruiser models. For 1" handlebar. Use appropriate bolt adaptors. Threaded fro 1/2"-13 adaptor.

    Euro Style Chrome Risers - 4``  Item #: 50-1304  $116.95

    CNC Machined. Riser kit fits most cruiser models. For 1" handlebar. Use appropriate bolt adaptors. Threaded fro 1/2"-13 adaptor.

    Euro Style Chrome Risers - 5``  Item #: 50-1305  $131.95

    CNC Machined. Riser kit fits most cruiser models. For 1" handlebar. Use appropriate bolt adaptors. Threaded fro 1/2"-13 adaptor.

  • Galfer Stainless Steel Brake Hose    $30.00

    Longer brake hose for use with your handle bar risers. This hose fits ONLY the following models, and these models need longer brake hoses for the risers to fit correctly

  • Suzuki Bandit - All model years
  • Suzuki SV650 1999-2002

  • Handlebar Riser Bolt Kit for Honda VTX1300R/C /VTX1800R/C  Item #: 50-55528  $45.95

    Adaptor kit for riser and T-Bar. Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

    Handlebar Riser Bolt Kit for Kawasaki VN2000  Item #: 50-55519  $45.95

    Adaptor kit for riser and T-Bar. Bolt for threaded risers. Sold in pairs. 1/2"-13 thread mounting holes

    Handlebar Riser Bolt Kit for Kawasaki VN2001  Item #: 50-55520  $45.95

    Adaptor kit for riser and T-Bar. Bolt for threaded risers. Sold in pairs. 1/2"-20 thread mounting holes

    Harley-Davidson Dyna Handlebar Risers  Item #: FXD017  $140.95

    This set replaces the stock risers and will bring the handlebars up 1” and back toward the rider 2”. While it may not seem like a lot, the 2” gives you a much more upright seating position rather than reaching over the gas tank, significantly reducing back, neck and shoulder fatigue. 

    Oval Chrome Heavy Duty Pullback Riser Set Height 4``, pullback 1-1/2``  Item #: 50-1234  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Oval Chrome Heavy Duty Pullback Riser Set Height 5``, pullback 1-1/2``  Item #: 50-1235  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Oval Chrome Heavy Duty Pullback Riser Set Height 6``, pullback 1-1/2``  Item #: 50-1236  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Oval Chrome Heavy Duty Pullback Risers 4`` Height, 1-1/2`` Pullback  Item #: 50-1244  $83.84

    Show quality die cast risers. Fit 1" handlebars. Threaded for 1/2"-13 adaptor. Use proper adaptor kit.

    Oval Chrome Heavy Duty Pullback Risers 5`` Height, 1-1/2`` Pullback  Item #: 50-1245  $83.84

    Show quality die cast risers. Fit 1" handlebars. Use proper adaptor kit.

    Oval Chrome Heavy Duty Pullback Risers 6`` Height, 1-1/2`` Pullback  Item #: 50-1246  $83.84

    Show quality die cast risers. Fit 1" handlebars. Use proper adaptor kit.

    Oval Chrome Heavy Duty Pullback Risers with Clamp Kit 4``Height, 1-1/2`` Pullback  Item #: 50-1224  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1600

    Oval Chrome Heavy Duty Pullback Risers with Clamp Kit 5``Height, 1-1/2`` Pullback  Item #: 50-1225  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1601

    Oval Chrome Heavy Duty Pullback Risers with Clamp Kit 6``Height, 1-1/2`` Pullback  Item #: 50-1226  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1602

    Oval Chrome Pullback Risers With Covers 4`` Height, 1-1/2`` Pullback  Item #: 50-1204  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2"-13 adaptor.

    Oval Chrome Pullback Risers With Covers 5`` Height, 1-1/2`` Pullback  Item #: 50-1205  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2"-13 adaptor.

    Oval Chrome Pullback Risers With Covers 6`` Height, 1-1/2`` Pullback  Item #: 50-1206  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2" - 13 screws.

    Riser Covers - Chrome (pair)  Item #: 50-1102  $43.85

    To use with handlebar riser sets

    Round Chrome Heavy Duty Pullback Riser Set Height 4``, pullback 1-1/2``  Item #: 50-1134  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Round Chrome Heavy Duty Pullback Riser Set Height 5``, pullback 1-1/2``  Item #: 50-1135  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Round Chrome Heavy Duty Pullback Riser Set Height 6``, pullback 1-1/2``  Item #: 50-1136  $139.31

    Decorative clamp and pullback riserset. Fits 1" handlebar and 4" riser spacing. Bolt kit sold separately. Use matching adaptor unit.

    Round Chrome Heavy Duty Pullback Risers 4`` Height, 1-1/2`` Pullback  Item #: 50-1144  $83.84

    Show quality die cast risers. Fit 1" handlebars. Use proper adaptor kit.

    Round Chrome Heavy Duty Pullback Risers 5`` Height, 1-1/2`` Pullback  Item #: 50-1145  $83.84

    Show quality die cast risers. Fit 1" handlebars. Use proper adaptor kit.

    Round Chrome Heavy Duty Pullback Risers 6`` Height, 1-1/2`` Pullback  Item #: 50-1146  $83.84

    Show quality die cast risers. Fit 1" handlebars. Use proper adaptor kit.

    Round Chrome Heavy Duty Pullback Risers with Clamp Kit 4``Height, 1-1/2`` Pullback  Item #: 50-1124  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1600

    Round Chrome Heavy Duty Pullback Risers with Clamp Kit 5``Height, 1-1/2`` Pullback  Item #: 50-1125  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1601

    Round Chrome Heavy Duty Pullback Risers with Clamp Kit 6``Height, 1-1/2`` Pullback  Item #: 50-1126  $147.05

    Decorative clamp and pullback riserset. 3-1/2" center space. Fits 1" handlebar. Use studs adaptor 50-55523. Fits: Kawasaki VN800, NV900, VN1500 96-04, Nomad, VN1600, Mean Streak, and Suzuki Marauder VZ1602

    Round Chrome Pullback Risers With Covers 4`` Height, 1-1/2`` Pullback  Item #: 50-1104  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2"-13 adaptor.

    Round Chrome Pullback Risers With Covers 5`` Height, 1-1/2`` Pullback  Item #: 50-1105  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2"-13 adaptor.

    Round Chrome Pullback Risers With Covers 6`` Height, 1-1/2`` Pullback  Item #: 50-1106  $101.90

    Universal chrome handlebar pullback risers - curved round top risers with covers and independent top clamps. Fits 1" handlebars. Use appropriate bolt adaptors. Threaded for 1/2"-13 adaptor.

    Customer Service: maria@orderstorm.com   720-939-8461
    Event Photos  |  Event Calendar  |  Racing News  | 

    OrderStorm.compowered by WordPress e-commerce company
    2002-2018 TITEBIKE.com. All Rights Reserved.
    Designated trademarks and brands are the property of their respective owners.
    Use of this Web site constitutes acceptance of the TITEBIKE.com Terms and Privacy Policy.